Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
The function of controlling via SMS messages is realized by sending an SMS message with
the following content:
Command (yyyy = access
code)
Description
Example
Onx yyyy
ACTIVATION of output x, where “x” (1, 2,
3) is the output no.; yyyy = access code
On1 1212
Offx yyyy
DEACTIVATION of output x, where “x” (1,
2, 3) is the output no.; yyyy = access
code
Off1 1212
Remarks:
•
Onx, Offx is default setings.
Contents 'on' and 'off” are configured in the OUTPUTS tab.:SMS on, SMS off
9.4.
Remote control of relays (outputs) status: PRSR-RF
This is performed either via SMS and the output parameters are configured in the PRS-RF
bookmark.
●
control via SMS is performed by sending an SMS in the following format:
Command
(yyyy= access code)
Description
Example
OnRx yyyy
ON relay x, where x (1,2) is the relay
number, yyyy is the access code
OnR1 1212
OffRx yyyy
OFF relay x, where x (1,2) is the relay
number, yyyy is the access code
OffR1 1212
9.5. Module status checking
This function consists in sending a SMS message with the following content:
yyyyy STATUS,
which triggers a module response in the form of an SMS message (where yyyy = access
code):
Command (yyyy =
access code)
Response
yyyyy STATUS
Inputs: I1 I2 I3 I4 I5 I6 I7 I8
Outputs: O1 O2 O3
System: Armed/Disarmed
Network: P
Failure/No failure
Clock not set
No connection with PSR
PSR status: AC.no AC.hi DC1.low DC2.low DC.hi AKU.low AKU.fail
Rel: R1 R2
Inputs: I1 I2 I3 I4 I5 I6 I7 I8
(Input status: 0 = intact, 1= violated;
X = disabled, B = blocked, 1=sabotaged)
Outputs: O1 O2 O3 O4
(Output status:
1 = +12V(O1)/0V (O2, O3,O4),
0 = no potential (O1);
output open
(
O2, O3,O4
)
System: Armed/Disarmed
(Status: armed/disarmed)
47
