Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
6.3 INPUTS
Input configuration, module reactions to violations and restores to a normal state,
can be set in this bookmark. The module has got eight inputs on the main board.
6.3.1 MGSM INPUTS
●
POLARITY:
The inputs of MGSM 5.0/5.0-PS can operate with many types of polarities:
I1-I6: NO, NC, EOL, 2EOL/NO, 2EOL/NC, OFF
I7-I8: NO, NC trigger by (0V ) or (+VDC)
■
NO –
denotes the GND level triggered signal (0V DC) NORMALLY OPEN state input.
The
I7, I8
inputs can be triggered by GND (0V DC) or “plus” (+V
DC
), depending on
the
JI7
and
JI8
settings.
The input in the NORMALLY OPEN state is triggered by
the GND (0V) signal.
The input in the NORMALLY OPEN state is triggered by
the “plus” (+U) signal.
JI7
is by default (ON)/
NO
in the
software
I7
in the NORMALLY OPEN state, is triggered
by the (short circuit) GND signal.
JI7
is (OFF)/
NO
in the software
I7
in the NORMALLY OPEN state, is triggered
by disconnecting “plus” signal
18
GND
+12V
+
