Preparing for Use
R&S
®
SMC100A
40
Operating Manual 1411.4060.32 ─ 04
Terminating VNC Connection
The remote access via VNC connection can be terminated either on the R&S SMC or on
the external PC. Terminating the connection does not disable it. It can be established
again any time. See the notice above concerning unauthorized access due to VNC con-
nection!
1. Terminate the connection on the R&S SMC
a) Press the "Windows" key to access the operating system.
b) Right-click on the VNC icon on the task bar and select "Kill all clients".
2. To terminate the connection on the external Linux/Unix PC, close the internet browser
or close the signal generator window.
3. To terminate the connection on the external Windows PC, close the VNC Viewer
program.
The connection is terminated. The color of the VNC icon in the status bar of the
instrument changes.
A message on the external PC indicates the disconnection.
Disabling Remote Access via Ultr@VNC
The VNC connection can be disabled by removing the program on the instrument or by
deactivating the VNC Server service.
1. Remove the VNC program
a) Press the "Windows" key to access the operating system and open the "Add or
Remove Programs" by selecting "Start > Settings > Control Panel > Add or
Remove Programs".
b) Remove the VNC program.
2. Deactivate the VNC Server service
a) Press the "Windows" key to access the operating system and open the "Ser-
vices" by selecting "Start > Settings > Control Panel > Services".
b) Deactivate the VNC Server service.
The connection is disabled, the VNC icon disappears from the task bar of the instru-
ment.
Remote Access via an External Controller
