![Rohde & Schwarz SMC100A Operating Manual Download Page 111](http://html.mh-extra.com/html/rohde-and-schwarz/smc100a/smc100a_operating-manual_1477935111.webp)
Instrument Function
R&S
®
SMC100A
94
Operating Manual 1411.4060.32 ─ 04
Annotation Frequency
Enables/disables the display of the currently used frequency in the header of the instru-
ment.
The setting requires the entry of the security password and is only accepted after the
"Accept" button is pressed.
SCPI command:
n.a.
Annotation Amplitude
Enables/disables the display of the currently selected level in the header of the instru-
ment.
The setting requires the entry of the security password and is only accepted after the
"Accept" button is pressed.
SCPI command:
n.a.
Display
Enables/disables the display.
If this parameter is disabled, the instrument cannot be operated manually via the user
interface, i.e. display, front panel keys and external keyboard are disabled. Remote con-
trol of the insrument is enabled.
The setting requires the entry of the security password and is only accepted after the
"Accept" button is pressed.
SCPI command:
Keyboard
Enables/disables an external keyboard and mouse connected to the instrument, the front
pannel keys of the instrument, the rotary knob and the on-screen keyboard.
If this parameter is disabled, the instrument cannot be manually controlled but changes
in the settings are shown on the display. Remote access and remote control are enabled.
The setting requires the entry of the security password and is only accepted after the
"Accept" button is pressed.
To enable the keyboard, type the security password on the external keyboard or use the
SYST:KLOC OFF
command over remote control.
SCPI command:
Security Password
Enters the password that is required to enable or to disable the settings protected by a
security password. Default is '123456'.
Note:
It is highly recommended to change the default security password before connect-
ing the instrument to the network.
General Instrument Settings