Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 260 / 355

Analyzer R&S UP300/350
E-1147.2759.00 6-260 Operating Manual, 11/2007
Note: In the Graph menu, you can change the graphic display area
( Ê 6-292, 6-296) and analyze the trace using the cursors ( Ê 6-300).
Bar graph
Select the BAR GRAPH display mode in the Graph menu ( Ê 6-288).
A bar graph is shown in the display area. The fundamental (1),
harmonics (2-10) (
Ê 6-261), and noise component (11) of the
measurement signal are displayed depending on the measurement
mode.
List of measurement values
Select the LIST OF VALUES display mode in the Graph menu ( Ê 6-288).
The frequency and level values of the first harmonic (fundamental), and
the relative level values of the other harmonics (2-10) and of the total
noise power for the measurement signal are shown in the display area.
Note: When you activate the measurement function, the R&S UP300/350
begins the continuous measurement. However, you can also start and stop
the measurement manually (
Ê 6-285).