R&S UP300/350
Graph Menu
Operating Manual, 11/2007
6-289
E-1147.2759.00
Q-Peak indicator (QUASI PEAK)
This display shows the current QUASI-PEAK measurement values in
analog form as a bar graph. The MIN and MAX values for the active
measurement is also shown.
List of values (SWEEP RMS+THD, FFT, THD, protocol analysis)
The results of the THD measurement are listed in a table, e.g.
THD measurement function (
Ê
Note:
If a scroll bar is displayed at the right, you can use the
5
or
6
cur-
sor keys [7], or the rotary knob to look at other measurement results.
Selecting
display parameters
1.
Press the
function key
in the
menu.
A selection field containing the available settings is displayed. The
default setting is dependent on the current measurement function, e.g.
“Spectrum“.
2.
Use the
rotary knob
[11] to select a setting.
3.
Press the
ENTER key
[5] to close the selection field.
The new setting is displayed in the measurement diagram.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
