Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 99 / 355

R&S UP300/350 Generator
Operating Manual, 11/2007 6-99 E-1147.2759.00
6.2.1 Configuring Generator Parameters (CONFIG)
Description The CONFIG menu is used for basic configuration of the generator. The
following settings are made in the CONFIG menu:
ƒ Switchover between the analog and digital generator (R&S UP350 only)
ƒ
Configuration of parameters for digital interface (R&S UP350 only)
ƒ Switchover between bandwidths (sample rate)
ƒ Activation/Deactivation of analog generator output
ƒ Configuration of output
ƒ Selection of range switching and setting of level range
Selecting the
CONFIG Menu
Use the
3
or
4
cursor keys to select the menu .
The menu name is highlighted and the function keys [13] are assigned
the appropriate function.
Analog generator
Function key
assignment
Select the generator type (digital) (R&S UP350 only). ( Ê 6-101)
Select the bandwidth of the generator. ( Ê 6-102)
Select the reference potential of the output signal. ( Ê 6-103)
Switch the generator output on/off. (
Ê
6-104)
Select the level range switching mode. ( Ê 6-105)