R&S UP300/350
Setting the Parameters
Operating Manual, 11/2007
5-67
E-1147.2759.00
5.5.4.2
Entry with the Cursor Keys and Rotary Knob
Example:
Entering a signal
frequency
(
Ê
1.
Press the
main menu
selection key
.
2.
Select the
menu
with the
3
or
4
cursor keys
3.
Press the
function key
in the
menu.
4.
Select the
menu
with the
3
or
4
cursor keys
[6].
5.
Press the
function key
in the
menu.
An entry field containing the current setting is displayed. At the same
time, the function keys are assigned various units of measurement.
Entering
a new value,
e.
g. 1.5 kHz
6.
Using the
3
and
4
cursor keys
[6], position the cursor on a decimal
place in the entry field.
3
×
Ö
7. a)
Press the
6
or
5
cursor keys
[7] until you obtain the value you
want.
Pressing the
5
cursor key once increments the value by one; pressing
the
6
cursor key once decrements the value by one.
5
×
Ö
b)
Turn the
rotary knob
[11] until you obtain the value you want.
Turning clockwise increases the value; turning counter-clockwise
reduces the value.
5
×
Ö
Note:
In both cases, there is a carry associated with incrementation or
decrementation. In other words, if a 9 digit is incremented or a 0 digit
decremented, a carry is added to, or subtracted from the next highest
digit.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
