Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 316 / 355

System Menu (SYS Menu key) R&S UP300/350
E-1147.2759.00 6-316 Operating Manual, 11/2007
6.5 System Menu (SYS Menu key)
Introduction The R&S UP300/350 has generator and analyzer functions as well as the
system and service functions.
In this menu, the hardware settings overview is displayed, current settings
can be saved, recalled, or printed out (
Ê 6-325), a selftest or self
calibrations can be performed, the system settings can be configured, and
the system and hardware information is provided.
Switching over the
user interface
When the R&S UP300/350 has been switched on and the selftest has run
without detecting any faults, the audio analyzer’s user interface is activated.
1. Press the BACK/SYS key [3].
The menus for the system and service functions are brought up on the
screen in the menu area and the functions key [13] are assigned the
appropriate functions. Depending on the function key assignment, the
associated parameters are listed as tables in the display area.
2. Press the BACK/SYS key [3] or ESC/CANCEL key [4].
The audio analyzer’s user interface is activated again.
Menus for
system and
service functions
Select and call the instrument‘s default setting. ( Ê 6-317)
Display the current instrument settings. ( Ê 6-320)
Save and load user-defined settings, print functions. ( Ê 6-323)
System settings ( Ê 6-328)
Service functions ( Ê 6-337)
Information about settings and hardware configuration ( Ê 6-338)
Perform the automatic calibration. ( Ê 6-341)