Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 164 / 355

Generator R&S UP300/350
E-1147.2759.00 6-164 Operating Manual, 11/2007
Setting the Amplitude Sweep Parameters
Description You can set the sweep parameters for the amplitude in the PARAM AMPL
submenu.
Selecting the
PARAM AMPL
submenu
Function key
assignment
Press the function key in the menu.
The submenu name is opened and the function keys [13] are assigned
the appropriate function.
Exit the submenu.
Enter the start value. ( Ê 6-165)
Enter the stop value. ( Ê 6-165)
Select scaling of sweep steps (Lin/Log). ( Ê 6-161)
Enter the number of reading points. ( Ê 6-167)
Enter the step size. ( Ê 6-167)
Enter the measurement delay. ( Ê 6-168)
Note: With the FREQ SWEEP sweep mode ( Ê 6-156), only the and
function keys are available. By using the key, you can enter
an amplitude value; determines the start delay of a new sweep.