R&S UP300/350
Setting the Parameters
Operating Manual, 11/2007
5-65
E-1147.2759.00
5.5.4
Entering Numerical Parameters
Introduction
When you select a menu, a number of instrument functions will be displayed
in the function area. If you press certain function keys, an entry field will be
displayed in the menu area.
The function key you select is highlighted.
There are two ways of entering numerical parameters:
Entry
of a number with the
numeric keys
Change
of a number with the
cursor keys
and
rotary knob
5.5.4.1
Entry with the Numeric Keys
Example:
Entering a
signal frequency
(
Ê
1.
Press the
main menu
selection key
.
2.
Select the
menu
with the
3
or
4
cursor keys
[6].
3.
Press the
function key
in the
menu.
4.
Select the
menu
with the
3
or
4
cursor keys
[6].
5.
Press the
function key
in the
menu.
An entry field containing the current setting is displayed. At the same
time, the function keys are assigned various units of measurement.
Entering
a new value
6.
Overwrite the old value, e.
g. with
21.5 kHz,
with the
numeric keys
Ö
Note:
If a numeric key is pressed after the entry field is brought up on the
screen, the old value will be erased. However, a complete new value
must now be entered using the numeric keys.
With the SYS/BACK key [3], a value entered using the keyboard can be
deleted again one character at a time.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
