R&S UP300/350
Analyzer
Operating Manual, 11/2007
6-223
E-1147.2759.00
6.3.1.3.2
Selecting the Input Signal
Use
The R&S UP350 allows you to select the following digital interfaces as signal
sources:
S/P DIF
BNC digital input
Optical
Optical digital input
Note:
The setting is always valid for both channels (Ch 1&2).
Selecting the
interface protocol
1.
Press the
function key
in the
menu.
A selection field containing the available settings is displayed. The
default setting is “S/P DIF“.
2.
Use the
rotary knob
[11] to select a setting.
3.
Press the
ENTER key
[5] to close the selection field.
The new setting is stored and displayed in the parameter field.
6.3.1.3.3
Selecting the Valid Number of Bits in the Input Signal
Use
If the word size of the input signal is reduced, the audio data is truncated to
the specified wordwidth (bits).
Selecting
the channel
1.
Press the numeric keys
1
,
2
, or
3
to select channel
Ch 1
,
Ch 2
, or both
channels
Ch 1&2
.
The selected channel is displayed in green in the channel display.
Selecting the valid
number of bits
2.
Press the
function key
in the
menu.
A selection field containing the available settings is displayed. The
default setting is “24 bits“.
3.
Use the
rotary knob
[11] to select a setting.
4.
Press the
ENTER key
[5] to close the selection field.
The new setting is stored and displayed in the parameter field.
Ch 1
Ch 2
Ch 1&2
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
