R&S UP300/350
Analyzer
Operating Manual, 11/2007
6-215
E-1147.2759.00
6.3.1.1
Selecting the Analyzer Type – Analog/Digital (R&S UP350 only)
Use
When the analyzer type is changed, the new analyzer (e.g. digital) with the
currently selected measurement functions and the stored parameters of the
old analyzer type (e.g. analog) is started.
Note:
The setting is always valid for both channels (Ch 1&2).
Selecting the
Analog analyzer
Press the
function key
in the
menu.
The instrument is in the analog mode. You can then use all the function
keys which appear to configure the input parameters and the basic
conditions of the analyzer. If the status line shows “ANALYZER –
ANALOG”, the instrument is in the analog mode.
Selecting the
Digital analyzer
Press the
function key
in the
menu.
The instrument is in the digital mode. You can then use all the function
keys which appear to configure the input parameters. If the status line
shows “ANALYZER – DIGITAL”, the instrument is in the digital mode.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
