Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 155 / 355

R&S UP300/350 Generator
Operating Manual, 11/2007 6-155 E-1147.2759.00
Displaying and
analyzing
measurement
results Graphical display
•
Switch the DUT between the generator [8] and analyzer [9], or switch
the Generator output to Analyzer input internally ( Ê 6-218).
•
Select the CURVE PLOT display mode in the Graph menu ( Ê 6-288).
•
Press the numeric key 4 to start sweeping ( Ê 6-285).
A measurement diagram with the sweep parameters is shown in the
display area.
Note: In the Graph menu, you can change the graphic display area
( Ê 6-288) and analyze the trace using the cursors ( Ê 6-300). For
activating the cursors you must stop the sweep.
List of measurement values
•
Switch the DUT between the generator [8] and analyzer [9], or switch
the Generator output to Analyzer input internally ( Ê 6-218).
•
Select the LIST OF VALUES display mode in the Graph menu
( Ê 6-288).
•
Press the numeric key 4 to start sweeping ( Ê 6-285).
The frequency and level values of the sweep are displayed.