R&S UP300/350
Analyzer
Operating Manual, 11/2007
6-285
E-1147.2759.00
6.3.4
Starting and Stopping the Measurements
Use
When you activate a measurement function, the R&S UP300/350 begins the
continuous measurement. You can, however, control the measurement
manually. The numeric keys 4, 5, and 6 are provided for this purpose.
4: START
Measurements are reset and restarted.
Simple sweeps are reset and restarted. Concatenated sweeps are
performed only once and then stopped.
5: SINGLE
Single measurements are performed. When a single measurement has
finished, MEASUREMENT STOPPED appears in the parameter field.
Simple sweeps are performed only once. In case of concatenated
sweeps, a partial sweep is performed. As soon as the measurement is
completed, SWEEP STOPPED is displayed in the status line.
6: STOP/CONTINUE
Continuous and single measurements or sweeps are stopped.
MEASUREMENT STOPPED or SWEEP STOPPED appears in the
parameter field.
Note:
The sweep is not supported by the
“CONTINUE” function.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
