Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 300 / 355

Graph Menu R&S UP300/350
E-1147.2759.00 6-300 Operating Manual, 11/2007
6.4.4 Trace Analysis Using Cursors (CURSORS)
Description You can position two cursors on the X axis and cursors on the Y axis and
move them over the display using the rotary knob or the cursor keys. The
measurement values under these cursors are shown in the full-screen display
(
Ê
6-314).
The cursor moves from one measurement value to
another. If there are more measurement values, they can be displayed as
points (e.g. with FFT); the maximum value of the measurement values repre-
sented by a particular point is displayed.
Selecting the
CURSORS menu
Select the menu with the
3
or
4
cursor keys .
The menu name is highlighted and the function keys [13] are assigned
the appropriate function.
Function key
assignment
Open the submenu: ( Ê 6-301)
Configure cursor 1 on the X axis.
Open the submenu: ( Ê 6-301)
Configure cursor 2 on the X axis.
Open the submenu: ( Ê 6-309)
Configure cursor 1 on the Y axis.
Open the submenu: ( Ê 6-309)
Configure cursor 2 on the Y axis.