Analyzer R&S
UP300/350
E-1147.2759.00
6-248
Operating Manual, 11/2007
Selecting the Measurement Bandwidth
Use
You can select different measurement bandwidths:
•
1%
The Bandwidth is 1 % of the centre frequency.
•
3%
The Bandwidth is 3 % of the centre frequency.
•
1/12 octave
The Bandwidth is 1/12 octave (5.77 %) of the centre frequency.
•
1/3 octave
The Bandwidth is 1/3 octave (23.15 %) of the centre frequency.
•
Rel.Value
The Bandwidth is the entered value in percent [%] of the centre fre-
quency.
•
Abs. Value
The Bandwidth is constant, referring to the entered value in Hz.
Note:
The setting is always valid for both channels (Ch 1&2). The bandwidth
used for measurement is always higher than or equal to 10 Hz, independent
of customer bandwitdh settings.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
