Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 190 / 355

Generator R&S UP300/350
E-1147.2759.00 6-190 Operating Manual, 11/2007
6.2.2.2.11 SWEEP THD
Description You can set the function parameters for a swept sinewave signal in the
SWEEP THD menu. Frequency and/or amplitude may change in this case.
The associated measurement function is automatically activated in the
analyzer.
Note: The sweep can be combined with only a few analyzer functions (Peak,
Quasi peak, RMS/FREQ). You have to switch off all other analyzer functions
before you can activate the sweep.
Selecting the
SWEEP THD menu 1. Call the generator SWEEP THD function ( Ê 6-112).
2. Select the menu with the
3
or
4
cursor keys .
The menu name is highlighted and the function keys [13] are assigned
the appropriate function.
Function key
assignment
Select the sweep mode. ( Ê 6-156)
Select the mesurement mode. (
Ê
6-193)
Set the measurement time. ( Ê 6-157)
Open the submenu: ( Ê 6-158)
Set the sweep parameters for frequency.
Open the submenu: ( Ê 6-164)
Set the sweep parameters for amplitude.
Activate/Deactivate the filter. (
Ê
6-232)
Select the unit for the level display. ( Ê 6-208)