Rohde & Schwarz Smart Instruments UP300, Operating Manual

Page: 196 / 355

Generator R&S UP300/350
E-1147.2759.00 6-196 Operating Manual, 11/2007
Setting the Sweep Parameters for Frequency
Description You can set the sweep parameters for the frequency in the PARAM FREQ
submenu.
Selecting the
PARAM FREQ
submenu
Function key
assignment
Press the function key in the menu.
The submenu is opened and the function keys [13] are assigned the
appropriate function.
Exit the submenu.
Enter the start value. ( Ê 6-197)
Enter the stop value. ( Ê 6-197)
Select scaling of sweep steps (Lin/Log). ( Ê 6-198)
Enter the number of reading points. ( Ê 6-199)
Enter the step size. (
Ê
6-199)
Enter the measurement delay. ( Ê 6-201)
Note: With the AMPL SWEEP sweep mode ( Ê 6-192), only the and
function keys are available. By using the key, you can enter a
frequency value; determines the start delay of a new sweep.