R&S UP300/350
Factory Default Settings
Operating Manual, 11/2007
6-89
E-1147.2759.00
6
Working with the R&S UP300/350
This chapter
Chapter 6 fully explains all the functions of the audio analyzer, and the
application of these functions. The menus are described in the same
sequence as the procedure for configuring and producing an output signal:
Factory default settings
Configuration of the generator
Configuration of the analyzer
Graphical display of the measurement results
Further information
The operating concept is explained in chapter 5, which also contains an
overview of the menus and functions.
The index at the end of this manual will also help you find the information you
want.
6.1
Factory Default Settings
Switching on for the
first time
When the R&S UP300/350 (
Ê
3-42) is switched on, the settings used when
the instrument was last switched off are restored. When you switch on for the
first time and if the "Factory" setting has been selected as the PRESET
default setting (
Ê
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
