manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Quick Start Manual

Share
Download
Rohde & Schwarz R&S FSV Quick Start Manual Download Page 199

Appendix: LAN Interface

R&S

®

 FSVA/FSV

176

Quick Start Guide 1321.3066.02 ─ 05

2. Select "Start > Control Panel > System and Security > System > Allow remote

access".

3. In the "System Properties" dialog box, in the "Remote" tab, select one of the

"Allow connections..." options, depending on your security requirements.

4. Define which users are to be given access to the R&S

 

FSVA/FSV via Remote

Desktop.

Note

: The user account under which configuration is carried out is automati-

cally enabled for Remote Desktop.
a) Select the "Select Users" button.
b) Select the users or create new user accounts as described in 

Chap-

ter 8.1.4, "Creating Users"

, 

on page 170.

c) Select "OK" to confirm the settings.

5. The R&S

 

FSVA/FSV is now ready for connection setup with the Remote

Desktop program of the controller.

Operation with Windows Remote Desktop

Summary of Contents for R&S FSV



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands