manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Quick Start Manual

Share
Download
Rohde & Schwarz R&S FSV Quick Start Manual Download Page 117

Basic Operations

R&S

®

 FSVA/FSV

94

Quick Start Guide 1321.3066.02 ─ 05

Some softkeys belong to a certain (firmware) option. If this option is not imple-
mented in your device, the associated softkeys are not displayed.

Hiding softkeys

You can hide the softkey display, e.g. when using remote control, in order to
enlarge the display area for the measurement results. When you press a function
key on the front panel, the softkeys are displayed temporarily, enabling you to
perform a certain task with the softkeys. They are then automatically hidden again
when they have not been used for a specified time. Any edit dialog boxes
required for entry remain in the display.

1. Press the DISPLAY key.

2. In the "Display Settings" dialog box, select "Softkey Bar State: Off".

The softkeys are no longer displayed.

► To display the softkeys again, select "Softkey Bar State: On".

Remote:

DISP:SKEY:STAT OFF

5.2.8

Context-sensitive Menus

Markers and traces in the display, as well as the information in the channel bar,
have context-sensitive menus. If you right-click on a marker or trace in the dis-
play, or information in the channel bar (or touch it for about 1 second), a menu is
displayed which contains the same functions as the corresponding softkey. This
is useful, for example, when the softkey display is hidden (see 

Chapter 5.2.7,

"Softkeys"

, 

on page 92).

 

Means of User Interaction

Summary of Contents for R&S FSV



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands