Preparing for Use
R&S
®
FSVA/FSV
49
Quick Start Guide 1321.3066.02 ─ 05
Changing the time
You can change hours, minutes and seconds independently of each other.
1. Select the hour, minute or seconds area of the "Time" field.
2. Enter the required setting via the keyboard or rotary knob.
3. Repeat these steps until the hour, minute and second settings are correct.
4. Click "OK".
Remote command
SYST:TIME 12,30,30
Changing the time zone
1. Select the "Time Zone" tab.
2. Press the arrow on the "Time Zone" field to display the list.
3. Select the required time zone from the list.
4. Optionally, select the "Automatically adjust clock for daylight saving changes"
check box.
5. Click "OK".
3.4.4
Aligning the Touchscreen
When the device is delivered, the touchscreen is initially aligned. However, it may
become necessary to adjust the alignment later, e.g. after an image update or
after exchanging a hard disk. If you notice that touching a specific point on the
screen does not achieve the correct response, try adjusting the alignment.
If the touchscreen is so out of order that you cannot navigate properly, con-
nect an external mouse to the R&S
FSVA/FSV and follow the steps descri-
bed below to start re-alignment.
1. Press the SETUP key.
2. Press the "Alignment" softkey.
3. Press the "Touchscreen Alignment" softkey.
R&S
FSVA/FSV Setup
Summary of Contents for R&S FSV
Page 25: ......
