Appendix: LAN Interface
R&S
®
FSVA/FSV
172
Quick Start Guide 1321.3066.02 ─ 05
3. Enter the command
C:\R_S\INSTR\USER\NO_AUTOLOGIN.REG
.
4. Press the ENTER key to confirm.
The automatic login function is deactivated. The next time you switch on the
instrument, you are prompted to enter your user name and password before
the firmware is started.
Adapting the automatic login function to a new password
If you change the "Instrument" user's (administrator's) password, which is used
during automatic login, this function no longer works. You must adapt the settings
for the command that activates the auto login function first.
1. Open the
C:\R_S\INSTR\USER\NO_AUTOLOGIN.REG
file in any text editor
(e.g. Notepad).
2. In the line
"DefaultPassword"="894129"
, replace the default password
(
894129
) by the new password which is to be used for automatic login.
3. Save the changes to the file.
Re-activating the automatic login function
1. In the "Start" menu, select "Run".
The "Run" dialog box is displayed.
2. Enter the command
C:\R_S\INSTR\USER\AUTOLOGIN.REG
.
3. Press the ENTER key to confirm.
The automatic login function is re-activated. It will be applied the next time the
instrument is rebooted.
Switching users when using the automatic login function
Which user account is used is defined during login. However, you can also switch
the user account to be used when the automatic login function is active.
► In the "Start" menu, select the arrow next to the "Shut down" button and then
"Log off".
The "Login" dialog box is displayed, in which you can enter the different user
account name and password.
Configuring the Network
Summary of Contents for R&S FSV
Page 25: ......
