manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Quick Start Manual

Share
Download
Rohde & Schwarz R&S FSV Quick Start Manual Download Page 129

Basic Operations

R&S

®

 FSVA/FSV

106

Quick Start Guide 1321.3066.02 ─ 05

5.4.4

Enlarging the Display Area

You can enlarge the screen display area if you are using an external

monitor or the Soft and Mini Soft Frontpanel display (see 

Chapter 5.4.3,

"Soft and Mini Soft Front Panel Display"

, 

on page 103). To do so, drag

the lower right corner of the window to the required size. In standard dis-

play, a small icon is displayed in the lower right corner of the screen.

5.4.5

Displaying the Toolbar

Standard file functions can be performed via the icons in the toolbar at the top of
the screen (see the 

Chapter 5.2.1, "Toolbar"

, 

on page 87). By default, this toolbar

is not displayed.

To display the toolbar:

1. Press the DISPLAY key.

2. Under "Select Tool Bar State", select "On".

Alternatively:

1. Press the SETUP key.

2. Press the "Display Setup" softkey.

3. Press the "Tool Bar State On/Off" softkey.

The toolbar is displayed at the top of the screen.

5.4.6

Zooming into the Diagram

You can zoom into the diagram to visualize the measurement results in greater
detail. Using the touchscreen or a mouse pointer you can easily define the area to
be enlarged.

 

 

 

Changing the Display

Summary of Contents for R&S FSV



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands