![Rohde & Schwarz R&S FSV Quick Start Manual Download Page 156](http://html.mh-extra.com/html/rohde-and-schwarz/rands-fsv/rands-fsv_quick-start-manual_1477866156.webp)
Basic Measurement Examples
R&S
®
FSVA/FSV
133
Quick Start Guide 1321.3066.02 ─ 05
Figure 6-10: Falling edge of the GSM burst displayed with high time resolution
6.4.2
Measuring the Signal-to-Noise Ratio of Burst Signals
When TDMA transmission methods are used, the signal-to-noise ratio or the
deactivation dynamic range can be measured by comparing the power values
during the activation phase and the deactivation phase of the transmission burst.
For this purpose, the R&S
FSVA/FSV provides the function for measuring abso-
lute and relative power in zero span. In the following example, the measurement
is performed using a GSM burst.
Signal-to-Noise Ratio of a GSM Signal
Test setup
Measurements in Zero Span
Summary of Contents for R&S FSV
Page 25: ......