manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Quick Start Manual

Share
Download
Rohde & Schwarz R&S FSV Quick Start Manual Download Page 196

Appendix: LAN Interface

R&S

®

 FSVA/FSV

173

Quick Start Guide 1321.3066.02 ─ 05

8.1.8

Mapping Network Drives

1. Press the SAVE/ RCL key on the front panel of the R&S

 

FSVA/FSV.

2. Press the "File Manager" softkey.

3. Press the "More" softkey.

4. Press the "Network Drive" softkey.

The "Map Network Drive" dialog box is displayed.

5. Press the "Drive" list to open the network drive list and select the drive you

want to map.
Alternatively:
● Press the "Map Network Drive" softkey to set the focus on the "Drive" list.
● Press ENTER to open the network drive list and select the drive you want

to map using the arrow keys.

6. To have the connection set up automatically each time the instrument is star-

ted, in the "Map Network Drive" dialog box, activate the "Reconnect at logon"
option.

7. To connect using a different user name, activate the "Connect using a differ-

ent user name" option.
The "Map Network Drive" dialog box is extended by the "User name" and
"Password" fields.

 

Configuring the Network

Summary of Contents for R&S FSV



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands