manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Quick Start Manual

Share
Download
Rohde & Schwarz R&S FSV Quick Start Manual Download Page 192

Appendix: LAN Interface

R&S

®

 FSVA/FSV

169

Quick Start Guide 1321.3066.02 ─ 05

8.1.2

Changing the Domain or Workgroup

Changing settings

Before you change other settings than described here, contact your network
administrator.

1. Press the "Windows" key on the external keyboard or the CTRL + ESC key

combination on your keyboard to access the operating system.

2. Select "Start > Control Panel > System and Security > System".

3. Scroll down to the "Computer name, domain, and workgroup settings" area.

4. Select "Change settings".

5. Select "Change..."

The dialog box for computer name and domain changes is displayed.

6. Enter a "Domain" or "Workgroup."

7. Confirm the changes with "OK".

8. Confirm the prompt to restart the instrument.

 

Configuring the Network

Summary of Contents for R&S FSV



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands