manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Quick Start Manual

Share
Download
Rohde & Schwarz R&S FSV Quick Start Manual Download Page 197

Appendix: LAN Interface

R&S

®

 FSVA/FSV

174

Quick Start Guide 1321.3066.02 ─ 05

8. Enter your user name and password.

9. Confirm with "OK".

The drive is displayed in the Explorer.

Note: 

Only networks that you authorized to access are connected.

Disconnecting network drives

1. Press the SAVE/ RCL key on the front panel of the R&S

 

FSVA/FSV.

2. Press the "File Manager" softkey.

3. Press the "More" softkey.

4. Press the "Network Drive" softkey.

5. Press the "Disconnect Network Drive" softkey.

The "Disconnect Network Drive" dialog box is displayed.

6. In the "Drive" list, select the drive you want to disconnect.

7. Confirm with "OK".

8.1.9

Sharing Directories (only with Microsoft Networks)

Sharing directories makes data available for other users. This is only possible in
Microsoft networks. Sharing is a property of a file or directory.

1. Press the "Windows" key on the external keyboard or the CTRL + ESC key

combination on your keyboard to access the operating system.

2. Open the "Windows Explorer".

3. Select the desired folder with the right mouse button.

 

Configuring the Network

Summary of Contents for R&S FSV



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands