Appendix: LAN Interface
R&S
®
FSVA/FSV
170
Quick Start Guide 1321.3066.02 ─ 05
8.1.3
Operating the Instrument Without a Network
To operate the instrument without a network connection either temporarily or per-
manently, no special measures are necessary. Windows automatically detects
the interruption of the network connection and does not set up the connection
when the instrument is switched on.
If you are not prompted to enter the user name and password, see
ter 3.5.3.1, "The Automatic Login Function"
8.1.4
Creating Users
After the software for the network has been installed, the instrument issues an
error message the next time it is switched on because there is no user named
"instrument" (= user ID for Windows automatic login) in the network. Thus, a
matching user must be created in Windows and in the network, the password
must be adapted to the network password, and the automatic login mechanism
must then be deactivated.
The network administrator is responsible for creating new users in the network.
1. Press the "Windows" key on the external keyboard or the CTRL + ESC key
combination on your keyboard to access the operating system.
2. Select "Start > Control Panel > User Accounts".
3. Select "Give other users access to this computer".
4. In the "User Accounts" dialog box, select "Add".
The "Add New User" dialog box is displayed.
5. Enter the name of the new user and the domain the user belongs to and
select "Next".
6. Define the level of access you want to allow the new user:
● Select "Standard" to create an account with limited rights.
● Select "Administrator" to create an account with administrator rights.
Note:
Full firmware functionality requires administrator rights.
7. Select "Finish".
The new user is created.
Configuring the Network
Summary of Contents for R&S FSV
Page 25: ......
