Rohde & Schwarz CMW500 Series, User Manual

Page: 27 / 291

Preparing for Use
R&S
®
CMW500
27 User Manual 1173.9463.02 ─ 02
Instrument damage caused by cleaning agents
Cleaning agents contain substances that may damage the instrument, e.g. solvent-con-
taining cleaning agents may damage the front panel labeling or plastic parts. Never use
cleaning agents such as solvents (thinners, acetone, etc), acids, bases, or other sub-
stances.
2.4.1 Storing and Packing
The R&S CMW500 can be stored at the temperature range quoted in the data sheet.
When it is stored for a longer period of time the instrument should be protected against
dust.
The original packing should be used when the instrument is to be transported or dis-
patched. If the original packing is no longer available, use a sturdy cardboard box of
suitable size and carefully wrap the instrument to protect it against mechanical damage.
2.5 Connecting External Accessories
The equivalent USB ports on the front and rear panel of the R&S CMW500 can be used
to connect a variety of accessories:
●
A mouse simplifies operation of the instrument using the controls and dialogs of the
Graphical User Interface (GUI).
●
A keyboard simplifies the entry of data.
●
A printer generates hard copies of the GUI (optional built-in display or connected
monitor).
In addition the R&S CMW500 provides interfaces for monitor connection and network
integration:
●
An external monitor shows the magnified Graphical User Interface (GUI) with all dia-
gram areas and controls.
●
A LAN connection can be established in order to access the hard disk or control the
tester from an external PC.
● Connecting a Mouse ...............................................................................................27
● Connecting a Keyboard ...........................................................................................28
● Connecting a Printer ...............................................................................................28
● Connecting a Monitor ..............................................................................................29
● Connecting a LAN Cable .........................................................................................30
2.5.1 Connecting a Mouse
A USB mouse can be connected to one of the Universal Serial Bus (USB) connectors on
the front panel or on the rear panel.
Connecting External Accessories