Command Reference
R&S
®
CMW500
218
User Manual 1173.9463.02 ─ 02
If '<StorageUnit>' is omitted, the storage unit is set to
D:
.
When the default storage unit is changed, it is checked whether the current directory (see
) is also available on the new storage unit. If not, the current
directory is automatically set to
'\'
.
Parameters:
'<StorageUnit>'
String parameter to specify the default storage unit
*RST:
a *RST does not change the default storage unit
Example:
MMEM:MSIS 'E:'
Sets the default storage unit to drive E
Example:
MMEM:MSIS '\\Server\Share'
Sets the default storage unit to the specified server
Usage:
SCPI confirmed
Firmware/Software:
V1.0.0.4
MMEMory:RCL
'<FileSource>'
Restores the instrument settings from the specified file.
This command has the same effect as the combination of
MMEMory:LOAD:STATe
and
*RCL
.
Parameters:
'<FileSource>'
String parameter specifying the path and filename of the source
file. Wildcards are not allowed.
Example:
MMEM:RCL '@SAVE\mysavefile.dfl'
Loads and activates the instrument settings from the file
mysa
vefile.dfl
located in the directory assigned to the
@SAVE
alias.
Usage:
Event
Firmware/Software:
V2.0.10
MMEMory:RDIRectory
'<DirectoryName>'
Removes an existing empty directory from the mass memory storage system.
Parameters:
'<DirectoryName>'
String parameter to specify the directory. Wildcards are not
allowed.
Example:
MMEM:RDIR 'D:\Rohde-Schwarz\CMW\Data\User1'
Removes the directory
User1
Usage:
Event
Firmware/Software:
V1.0.0.4
Instrument-Control Commands
