Command Reference
R&S
®
CMW500
210
User Manual 1173.9463.02 ─ 02
numbers are allowed, as well as the special characters "_", "^", "$", "~", "!", "#", "%", "&",
"-", "{", "}", "(", ")", "@" and "`". Reserved file names are
CON, AUX, COM1, ...,
COM4, LPT1, ..., LPT3, NUL
and
PRN
.
Mass memory commands are marked as "SCPI confirmed" if they provide at least the
functionality defined by SCPI and can be used as specified by SCPI. Nevertheless these
commands may provide additional features not specified by SCPI, like wildcards. The
functionality can also be enhanced via additional optional parameters.
List of commands:
............................................................................................213
.........................................................................................215
.................................................................................................216
...............................................................................................219
MMEMory:ALIases?
Returns the defined alias entries and the assigned directories. These settings are pre-
defined and can not be configured.
Example:
MMEM:ALIases?
Possible response:
"@SAVE","D:\Rohde-Schwarz\CMW\Data\Save",
"@PRINT","D:\Rohde-Schwarz\CMW\Data\Print",
"@USERDATA","D:\Rohde-Schwarz\CMW\Data\"
Example:
When you specify a file destination, an alias can be used instead
of the corresponding path. With the definition of the alias
@SAVE
listed above, the following two strings identify the same file:
"@SAVE\A\myfile.dfl"
"D:\Rohde-Schwarz\CMW\Data\Save\A\myfile.dfl"
Usage:
Query only
Firmware/Software:
V2.0.10
Instrument-Control Commands
