Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
3 / 130
INFORMATIONS ON INSTALLATION
INSTRUCTIONS
These instructions, together with the project
documentation (see other valid documents),
enable you to install the bus bars correctly.
The figures contained in these installation
instructions are for illustration purposes. You
must refer to the project documentation (see
other valid documents) for the actual design.
Staff must carefully read through and understand
these instructions before starting any work.
Adherence to all the safety information and
instructions specified in these instructions is a basic
requirement to ensure safety whilst working.
COPYRIGHT
The local occupational health and safety regulations
and general safety rules for the installation of bus
bars also apply.
The contents of these instructions are protected by
copyright. They may be used within the scope of
installation of the SIS bus bar system. Any other form
of use going beyond this is not permitted without
written permission from RITZ Instrument
Transformers GmbH.
CUSTOMER SERVICE ( KIRCHAICH SITE )
Telephone number: +49 9549 89-0
e-mail: [email protected]
