INSTALLATION
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
43 / 130
Example of installation of an insulated
bracket
……………………………………...
Fig. 12: Overview of the individual parts
The following components are required (Fig. 12):
– Bracket
– Dowel
– Fix anchor
– T-bolt and nut
– Conical spring washer
– Insulation pipe and insulation plate
To install the bracket on concrete, the pre-installed
nuts and washer of the heavy-duty dowel are not
used. They are replaced with a nut and a conical
spring washer. In addition, an insulation pipe is used
and the aluminium bracket is equipped with an
insulation plate. This ensures that no conductive
connection is created between the fixation unit and
the building.
Personnel:
Installation staff
Protective Equipment:
Occupational safety clothing
Hearing protection
Industrial safety helmet
Protective gloves
Safety footwear
When installing insulated brackets in conjunction with heavy-duty
dowels (fix anchors), proceed as follows:
1.
Refer to the manual of the dowel’s manufacturer for
the correct drill, drill depth and thread overhang
accordingly.
2.
Use nut and conical spring washer for the anchor
according to the project documentation. Do not use the
nut and washer originally packed to the anchor from the
anchor manufacturer.
