SAFETY
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
23 / 130
Qualified electrician
…………………..… The qualified electrician is capable of carrying out work on
electrical equipment, and identifying and preventing possible
hazards independently due to specialist qualification, skills, and
experience and knowledge of the applicable standards and
regulations.
The qualified electrician has been specifically trained for the
working environment, and is familiar with the relevant standards
and regulations.
Basic requirements
…………...………… Staff must only consist of personnel who can be expected to
per- form the work reliably. Personnel whose reactions are
affected, e.g. by drugs, alcohol, or medication, are not
permitted.
When selecting staff, the applicable local age limits and specific
professional regulations must be observed.
Unauthorised parties
…………...………
WARNING!
Risk of injuries for unauthorised parties due to
hazards in the installation area!
Unauthorised persons, who do not fulfill the
requirements described herein, are not familiar with
the hazards in the installation area. Unauthorised
persons are therefore at risk of serious or fatal
injury.
Therefore, all work must only be carried out by
appropriately qualified staff.
– Keep unauthorised persons away from the
installation area.
– In case of doubt, address the persons and
instruct them to leave the installation area.
– Stop work while unauthorised parties are
in the installation area.
Training
…………...………………….……. The owner must provide staff with regular training. For better
record keeping, a training log with the following minimum
content has to be created:
Date of training
Name of the party receiving training
Content of the training
Name of the party providing training
Signatures of the parties receiving and providing training
2.6
PERSONAL SAFETY
CLOTHING AND EQUIPMENT
Personal safety clothing and equipment is used to protect
personnel from compromised safety and risks to health when
working.
Staff must wear personal safety clothing and equipment when
performing different tasks upon, and with, the bus bar system.
The individual sections of these instructions make specific
reference to the requirements.
