INSTALLATION
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
56 / 130
Fig. 34: Removing the transport securing
device
Do not use a knife when removing the transport
securing device.
3.
Carefully wipe off transport grease from the flange
connections with a lint-free rag.
Fig. 35: Cleaning the flange connections
4.
Clean the surface of flange connections with a
grinding sponge or grinding fleece (Fig. 35).
5.
Remove residue from grinding and dust with
acetone and a lint-free rag.
6.
Make a note of the serial numbers and enter
them into the general drawing.
The serial numbers of the bars are engraved on the
flange connections.
7.
Clean all connection surfaces thoroughly with
acetone and a lint-free rag.
