INSTALLATION
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
77 / 130
Fig. 76: Bellows (inside view)
4.
From the inside of the bellows, use the knife to
cut the bellows to size with a clean cut (Fig. 76).
Fig. 77: Sealing surface
The result is a flat sealing surface that is free of
burrs (Fig. 77).
Fig. 78: Checking the contour
5.
Check that the contour of the cut is perfect (Fig.
Fig. 79: Bellows fully insulated (example)
If the contour of the bellows has been selected
correctly, the bellows can be installed.
