Rion NA-28, Manual, Page: 94 / 98

86
Commands
Examples for Control Via External Commands
This section contains several examples for controlling operation of the sound
level meter via commands. An initial steps are common to all operations:
• Check index number
To check whether a setting was made properly, using a request command
after sending a setting command is recommended.
Refer to the page 40 for sending a command format.
Example: Get sound level
* Power ON cannot be controlled by a communication command.
Power ON
IMD0 (SLM mode)
Settings
- WGT0_1 (Main: A, Sub: C)
- TMC0_0 (Main: F, Sub: F)
- RNG3 (20 to 110 dB)
Establish the above settings to prepare the sound level meter for measure-
ment.
DOD ? (Get display value)
_ stands for a space.