Rion NA-28, Manual, Page: 75 / 98

67
Commands
SPM
Sleep mode (corresponds to Measurement Trigger mode
Sleep mode)
Sleep mode (low power consumption mode) is applicable only during
use of the time trigger function.
When the unit is in sleep mode (low power standby), USB communi-
cation is also disabled, and no commands will be accepted.
Use of this command therefore is usually not recommended.
The command is only valid if the unit is currently in
L
p
mode (except
pause). In other cases, error 0003 is returned.
Setting command SPM p1
Parameter Content
p1 = 0 Do not use sleep mode when using time trigger
p1 = 1 Use sleep mode when using time trigger
Request command SPM ?
Response data d1
Return value Content
* Same as for setting command