Rion NA-28, Manual, Page: 63 / 98

55
Commands
Data related commands
LTI
Elapsed measurement time
If the unit is displaying a menu or is in recall, calibration, or adjust-
ment mode, error 0003 is returned. In other cases, the command is
valid.
Request command LTI ?
Response data d1,d2,d3
Return value Content
d1 Hours
d2 Minutes
d3 Seconds
In case of the store mode is Auto1 or Auto2, the response data as
follows.
Response data d1,d2,d3,d4
Return value Content
d1 Days
d2 Hours
d3 Minutes
d4 Seconds
* If this command is sent after completion of a measurement,
the elapsed measurement time at the point of measurement
completion is returned.
* There is no setting command.