Rion NA-28, Manual, Page: 77 / 98

69
Commands
DCL
Initialization (corresponds to System Save/Load Settings Set
default values)
Only valid if the unit is currently in
L
p
mode (except pause). In other
cases, error 0003 is returned.
Setting command DCL
* There is no parameter.
* The USB communication setting will remain ON.
* All other settings except USB communication are returned to
the default condition.
* The unit index is incremented by 1. Keep this in mind if you
are using an index other than 1.
VER
Version (no corresponding operation)
Only valid if the unit is currently in
L
p
mode (except pause) or in
calibration mode. In other cases, error 0003 is returned.
Request command VER ?
Response data d1,d2
Return value Content
d1 = 0 NA-28
d2 = x.y System version
* There is no setting command.