Rion NA-28, Manual, Page: 82 / 98

74
Commands
TTR
Trigger time (corresponds to Measurement Trigger mode
Trigger start time/Trigger end time setting)
Only valid if the unit is currently in
L
p
mode (except pause). In other
cases, error 0003 is returned.
Setting command TTR p1 p2 p3 p4 p5 p6 p7 p8 p9
Parameter Content
p1 = 1 to 12 Start Month
p2 = 1 to 31 Start Day
p3 = 0 to 23 Start Hours
p4 = 0 to 59 Start Minutes
p5 = 1 to 12 End Month
p6 = 1 to 31 End Day
p7 = 1 to 23 End Hours
p8 = 0 to 59 End Minutes
p9 = 0 Trigger interval OFF
p9 = 1 Trigger interval 5 m
p9 = 2 Trigger interval 10 m
p9 = 3 Trigger interval 15 m
p9 = 4 Trigger interval 30 m
p9 = 5 Trigger interval 1 h
p9 = 6 Trigger interval 8 h
p9 = 7 Trigger interval 24 h
Request command TTR ?
Response data d1,d2,d3,d4,d5,d6,d7,d8,d9
Return value Content
* Same as for setting command
* d1 to d9 correspond to p1 to p9