Rion NA-28, Manual, Page: 89 / 98

81
Commands
Communication control commands
RMT
Remote mode (no corresponding operation)
If the unit is displaying a menu or is in recall or calibration mode,
the command is not valid and error 0003 is returned.
When remote mode has been set to On (1), the operation keys on the
unit are inactive (except for the POWER key).
Infrared remote control is also inactive, regardless of its setting.
When remote mode has been set to Off (0), the operation keys on the
unit are active, and the infrared remote control operates according
to its setting.
Setting command RMT p1
Parameter Content
p1 = 0 Remote mode OFF
p1 = 1 Remote mode ON
Request command RMT ?
Response data d1
Return value Content
* Same as for setting command
EST
Error information (no corresponding operation)
This command can be used in all modes.
Request command EST ?
Response data d1
Return value Content
d1 = error code Returns the most recent error code.