Rion NA-28, Manual, Page: 46 / 98

38
Commands
Command Format
In this manual, a single character is represented as “ ”, a space as “_”,
parameters as “p1,p2,...”, and response data as “d1,d2,...”. Parameters and
response data may be more than 1 character long.
Commands consists of three letters which are not case-sensitive (upper-case
or lower-case can be used).
When a command has a parameter, the parameter follows the command. It can
be appended to the command either directly or with a separating space.
p1 Valid
_ p1 Valid
When a command has several parameters, the parameters must be separated
by a space.
p1_p2 Valid
p1p2 Not valid
Note
One command block can only contain one command.
Do not include several commands in a block.
A request command consists of the command, any required parameter, and
a “?”. The command and “?” or parameter and “?” may be separated by a
space.
? Valid
_? Valid
p1? Valid
p1_? Valid