Rion NA-28, Manual, Page: 13 / 98

5
Installing the USB Driver
By connecting the NA-28 to a computer with a USB cable, and using a dedi-
cated communication/control program, the NA-28 can be controlled remotely
from the computer, and measurement data can be sent to the computer in
real time. To enable use of these functions, you must fi rst download driver
software from the RION Corporation web site and install this driver on the
computer to be used with the NA-28. The driver will create a virtual COM
port on the computer.
Installation procedure
When connecting the NA-28 and the computer for the fi rst time, install the
USB driver as follows.
1. Download the latest USB driver from the RION Co., LTD. web site
(http://www.rion.co.jp/english/).
When using 32 bit OS, execute the fi le “setup.exe” located in the
“installer_x86” folder.
When using 64 bit OS, execute the fi le “setup.exe” located in the
“installer_x64” folder.
The installation starts.