Rion NA-28, Manual, Page: 68 / 98

60
Commands
Measurement control commands
SRT
Measurement processing (corresponds to START/STOP key op-
eration)
If the unit is displaying a menu or is in recall, calibration, or adjust-
ment mode, the command is not valid and error 0003 is returned.
Setting command SRT p1
Parameter Content
p1 = 1 Start processing measurement
p1 = 0 Stop processing measurement or auto store
* During auto store, p1 = 1 is not valid (0003).
* If p1 = 1 is sent while a processing measurement is in progress,
processing will restart.
Request command SRT ?
Response data d1
Return value Content
d1 = 1 Processing measurement
d1 = 0 Processing measurement stopped or auto store
in progress
STO
Store (corresponds to STORE key operation)
Only valid if the unit is currently in
L
p
mode (including pause). It is
also valid in the request only store condition.
Setting command STO p1
Parameter Content
p1 = 1 Execute store process/Start auto store
* To stop auto store, use the SRT command.
Request command STO ?
Response data d1
Return value Content
d1 = 1 Auto store in progress
d1 = 0 Auto store stopped