Rion NA-28, Manual, Page: 73 / 98

65
Commands
ADR
Store address (no corresponding operation)
The setting is valid only if the unit is currently in
L
p
mode or in
L
p
pause
mode and in store mode. In other cases, error 0003 is returned.
The request command is not valid if the unit is displaying a menu
or is in recall, calibration, or adjustment mode. In such cases, error
0003 is returned.
Setting command ADR p1
Parameter Content
p1 = 1 to 1000 Address for manual store
* Cannot be set if the store mode is not manual.
Request command ADR ?
Response data d1
Return value Content
d1 = 1 to 1000 When unit is in manual store mode
* When the unit is not in manual store mode, an indeterminate
value may be returned.
CDR
Card capacity/remaining (corresponds to System CF Capacity,
capacity indication at top right of current screen)
If the unit is displaying a menu or is in recall or calibration mode,
the command is not valid and error 0003 is returned.
Request command CDR ?
Response data d1,d2
Return value Content
d1,d2 = 0.0 to 1945.3
Unit is MB
* d1 indicates total CF card capacity, and d2 remaining free
capacity.
* There is no setting command.