Rion NA-28, Manual, Page: 76 / 98

68
Commands
System commands
BAT
Battery status (no corresponding operation)
This command is valid in any operation state of the unit.
Request command BAT ?
Response data d1,d2
Return value Content
d1 = 1 Flashing (Empty)
d1 = 2 1 segment (Low)
d1 = 3 2 segments (Mid)
d1 = 4 3 segments (High)
d1 = 5 4 segments (Full)
d2 = 1 Unit is powered by internal batteries
d2 = 2 Unit is powered by external DC supply
* There is no setting command.
CLK
Current date/time (corresponds to System Current Date/Time)
The setting command is only valid if the unit is currently in
L
p
mode
(except pause). In other cases, error 0003 is returned.
The request command is not valid if the unit is displaying a menu or is
in recall or calibration mode. In such cases, error 0003 is returned.
Setting command CLK p1 p2 p3 p4 p5 p6
Parameter Content
p1 = 2000 to 2063 4-digit calendar year
p2 = 1 to 12 Month
p3 = 1 to 31 Day
p4 = 0 to 24 Hours
p5 = 0 to 59 Minutes
p6 = 0 to 59 Seconds
Request command CLK?
Response data d1,d2,d3,d4,d5,d6
Return value Content
* Same as for setting command