Rion NA-28, Manual, Page: 71 / 98

63
Commands
Memory related commands
SMD
Store mode (corresponds to Store Store mode)
Only valid if the unit is currently in
L
p
mode (except pause). In other
cases, error 0003 is returned.
Setting command SMD p1
Parameter Content
p1 = 0 Manual
p1 = 1 Auto1
p1 = 2 Auto2
Request command SMD ?
Response data d1
Return value Content
* Same as for setting command
SNS
Store name (corresponds to Store Store name)
Only valid if the unit is currently in
L
p
mode (except pause). In other
cases, error 0003 is returned.
This specifi es the name of the store folder on the CF card.
Setting command SNS p1
Parameter Content
p1 = 0000 to 9999 Nu mer ic p or t ion of M A N _ ,
AU1_ , AU2_
* To specify a number of less than 4 digits, use leading zeros.
* For example, to specify 20, use “SNS_0020”. “SNS_20” will
result in an error.
Request command SNS ?
Response data d1
Return value Content
* Same as for setting command
* The name set with the SNS command is the folder name that will
be used when storing data on CF card. The store name is not used
when storing data in the internal memory.